Re: TR-6 Windscreen Removal and Dash Pad aligning

[Jeff Nathanson <jeffn@msystech.com>]

Joe,

        There's no magic, just labor intensive. Got to remove the
        the dash first. Then, there's, (as I remember) two screws on
        each side. One needs to be loosened, the other, at the end
        of the post needs to be removed. After that, it's just a lift
        up evenly on both sides. It's alot easier with two people
        since it should be lifted evenly on both sides. Just two
        suggestions - use a rubber mallot at the end of each stud if
        it seems stuck, also replace the 25+ year old rubber insulation
        since it's an opportune time

        Since,
        Jeff N
        '72 TR6