Problem may be that you have the points incorrectly installed. Check to see
that
the points are not shorted to ground at the post where the lead attaches. John
KHOCO@aol.com wrote:
> Helpppppppp
> I'm trying to get the new spit started. No spark, not anywhere.
> Not from plug wires,not from HT lead.
> Installed new coil, new points, and new condenser. still nada.
> Wires to coil hooked up correctly. Voltage to coil ok. Voltage from coil ok.
> wire from coil to distrib ok. Tried different plug wires from coil to ground,
> No good. Tried piece of wire from coil to ground, no luck. Don't know correct
> gap for Spit. I set them at .014.
> Is it possible that the new coil is bad? Or the condenser? Is
> there any thing else Iv'e missed. Maybe utter some Incantations to the gods
> of Lucas, Sacrafice a spark plug or somthing?
> Anyway any help is welcome, and as always TIA. At Least I
> thought of a name for the Spit
>
> Ken Copeland
> 70 GT6+ KC78784
> 70 Spit FDU84919 (Sparky) :o)
|