Have had no response on this question and thought I would send it again. If
anyone can help please reply.
----------
> From: Russell Messersmith <krus@worldnet.att.net>
> To: Triumphs List <triumphs@autox.team.net>
> Subject: TR6 wiring
> Date: Monday, May 24, 1999 12:08 AM
>
> Listers I am making progress on the wiring on the TR6. So far I have
the
> head lites, tail lites, marker lites(rear), wiper motor(one speed only)
> Brake lites,heater fan both speeds, and dash lites working. I have a
> question about a wire coming out of the ignition switch. Ther is a black
> wire ( about 2 Ft.) with a condensor attached. This wire is coming out
of
> the ignition switch. The condesor and wire are connected together by a
> female spade connector to a female spade on the ignition switch. Can
> anyone tell me where this black wire goes? Does it go to the coil or
> distributor? I believe I pulled this wire back thru the fire wall. It
was
> sticking out in the area of the M.C.if I remember correctlu. This is a
72
> TR6 commission # CC85????.
>
> Thanks Russ
>
> 1967 TR4A
> 1972 TR6
|