triumphs
[Top] [All Lists]

Re: Removing Transmission tail housing (TR4)

To: "Tony Rhodes" <ARhodes@compuserve.com>, "Triumph List" <triumphs@autox.team.net>
Subject: Re: Removing Transmission tail housing (TR4)
From: "Brian Sanborn" <sanborn@net1plus.com>
Date: Wed, 7 Jul 1999 20:13:20 -0400charset="iso-8859-1"
Tony,

I got the brass hammer from AutoZone and the brass drifts from Harbor
Freight.

Brian Sanborn
62 TR4          CT16260L  - Groton,  MA

My TR4 Restoration Web Site
http://www.net1plus.com/users/sanborn/Home.html (Big Update on 6/13/99)
E-Mail: sanborn@net1plus.com

-----Original Message-----
From: Tony Rhodes <ARhodes@compuserve.com>
To: Brian Sanborn <sanborn@net1plus.com>; Triumph List
<triumphs@autox.team.net>
Date: Monday, July 05, 1999 1:11 PM
Subject: Re: Removing Transmission tail housing (TR4)


>
>Message text written by "Brian Sanborn"
>>Good luck.... just be methodical, keep clear notes and pictures and keep
>very close attention to the Haynes instructions<
>
>Thanks.
>
>I will get a brass head hammer (have to figure out where!)
>Could not find a puller with more than 8" draw.  This needs about 10+
inches.
>
>I have a big rubber mallet, and will try that on the wings.  Just does
>not seem to want to move after the first 3/8"
>
>I plan on meing very methodical too, hopefully.
>
>-Tony
>


<Prev in Thread] Current Thread [Next in Thread>