Message text written by Jerry Oliver
>The front springs sold by Moss are 10 1/4 inches long. On page 33 of
their 4-4A catalog they have a note about using a packing piece
(thinner) with these springs.<
Well, if the ride height is too high in the front, you can remove
the packing piece. Stock 4A's typically used no packing piece
at all (but this varied a little). The packing piece is used to shim
up the ride height as determined by a specific spring. It is not
a problem to delete the packing piece especially if your height
is too high.
-Tony
|