Tony--
Checking the frame will have to be my next move. I'd much rather rule out a
warped frame than switch the front springs out . (I had the rear springs off
a few weeks ago based on my alignment shop's guess that the problem was with
the rear suspension. But everything looked perfect and measurements were
consistent.) After checking the frame, I think I'm going to stop worrying
about this until winter & enjoy driving it since alignment's not a problem.
Thanks again.
Ian CF57345U
Tony Rhodes wrote:
> Message text written by Canada
> >When you recommend adding a 5/8 inch spacer, I assume you mean
> body-to-frame spacers?<
>
> Actually I meant (regarding the 5/8" spacer) a spacer fitted to the spring
> to increase its overall length. 5/8" of spring length correlates to 1" of
> ride height..
>
> I can't see any other option than the frame being bent. I mentioned the
> body-to-frame
> spacers mainly to rule them out.
>
> Can you have the frame checked at some other frame shop?
>
> -Tony
|