Congratulations on your rebuild Patrick,
When our cars were new, the petroleum industry was creating new formulations
of chassis grease that far exceed their predecessors lubricating abilities.
So any grease that you get now would be sufficient for you rebuild. I
believe that if you are going to install stock bushes and bearings that any
organic or synthetic with Moly E.P. will do the job quite nicely. If you
are upgrading to the performance upgrade bushes that are harder than stock ,
I would suggest a good semi or full synthetic grease.
Larry Zink
Z Group Racing and Performance
Houston, Texas
----- Original Message -----
From: Patrick Bitton <pbitton@axess.com>
To: Triumph <triumphs@autox.team.net>
Sent: Saturday, June 12, 1999 11:45 PM
Subject: Grease Question
>
> Can someone the grease I should use on my car. I am rebuilding from
scratch
> and I am at the point that I am installing the bearings, trunnions, hubs
> etc... What I need to know is what types of grease and for which part I
need
> it for.
>
> Thanks in advance,
>
> Patrick
>
> TR-6 70 and 73
> Ground UP
>
>
|