Pete,
The "duh, you idiot" moment struck after I got the first email that said
the same thing (that the bolts pass through the box section) - so I went
out and checked and this time found them! I don't know what was happening
yesterday, it must have be one of those "bad car days" when more things
went wrong than right.
This list is a really good resource, and folks seem to suffer fools (and
their daft questions) really well.
Thanks, Tony
>Tony
>
>Those bolts pass all the way through the frame member and have a nyloc and
>washer on the other side. There's 4 bolts per side, 2 bolts, washers and
>nuts per bracket. From what you describe, it sounds as if you've loosened
>the nylocs, but now you're just spinning the bolt and the nyloc on the
>other side. Sounds like you need to get a wrench on the backside of that
>frame member. I just got done with this whole operation on mine.
>
____________________________________________________________________________
Anthony Gordon Technology Education Coordinator
Saginaw Public Schools tel: 1-517-797-4855
ISDC, 1505 Ottawa Blvd fax: 1-571-797-4778
Saginaw, MI 48602, USA email: tgordon@saginaw-city.k12.mi.us
|