Egil Kvaleberg wrote:
> On 7 Apr 1999, Alan Myers wrote:
>
> > With
> > that accomplished, it's pretty easy to "inject" your choice of lubricant
> > until it drips out the other end
>
> The problem with speedo-cable is that they are very easy to
> over-lubricate.
>
> Take out the rotating cable, check for kinks, rinse, and then lubricate with
> a thin layer of thin grease and wipe of any excess.
>
> > CarlSereda@aol.com wrote:
> > > May want to dunk
> > > entire cable in oil
>
> Definitely not, that is a sure recipe for a bouncing needle. Do not use
> engine oil.
>
> Egil
> --
> Email: egil@kvaleberg.no Voice: +47 22523641, 92022780 Fax: +47 22525899
> Mail: Egil Kvaleberg, Husebybakken 14A, 0379 Oslo, Norway
> Home: http://www.kvaleberg.no/
Uh-oh, here we go again! Maybe we should just lube the speedo cables with
whatever
lube we put in overdrive gearboxes! ;-)
Regards,
Brian Schlorff '61 TR-4 '64 TR-4 '72 TR-6 '79 Spit
---------------------------------------------------------------------
Power British Check out Power British
371 E. Main St. on the 'net!
Norristown, PA 19401
(610) 270-0505 http://www.powerbritish.com/~britcars
---------------------------------------------------------------------
|