Nope...no easy way around this one, unless you can fasten some sort of
magnet arangement to hold the tappets up. you can't pull the tappets
through the head and with out the can in place they fall into the sump.
Have fun....It's not that bad of a job.
aaron
On Sun, 31 Jan 1999, Bob Sykes wrote:
>
> Worldly Scions,
>
> Can a (GT6 Mk3) cam be replaced without removing the cylinder head?
> I know the rockers and push-rods must be removed regardless.
>
> adTHANKSvance,
>
> --
> Bob (short cut) Sykes
>
>
|