Tony,
If you are talking about the piece that the end of the cable housing
attaches to, I had to fabricate one along with the other parts that
complete the assembly.
If you have a Haynes Manual, there is a photo and accompanying drawing
on page 100 that shows what it looks like. Let me know if this is what
you need. I might be able to help.
Regards,
Joe
Tony Childs wrote:
>
> I'm looking for the very same bracket as well. I am converting my '72 Spit
> to twin SU (HS2) from the single ZS150. Dave, if you find more than one
> bracket, I would appreciate it if you would forward the info to me. Thanks!
>
> Tony Childs
> 72 Spitfire - FK38809U
> 64 Spitfire - FC42218L
>
> -----Original Message-----
> From: Dave Massey <105671.471@compuserve.com>
> To: TR List <triumphs@autox.team.net>
> Date: Sunday, November 29, 1998 7:26 PM
> Subject: Needed: Accelerator cable bracket 1500 Spitfire
>
> >
> >Listeratti:
> >
> >I am undoing some DPO modifications to a 1979 Spitfire 1500 a friend of
> >mine bought a few years back. The PO had replaced the ZS carb with a
> >Dellorto (or some other weber knock-off). (He also put on some headers,
> >removed the air pump and a few other modifications.) Although he
> >religiously saved all the parts in an artillery box the bracket for the
> >accelerator cable got lost. This is the "U" shaped piece that mounts to
> >the intake manifold and the accel cable sheath attaches to it. It also has
> >a hole for the rod and spring that attaches to the throttle shaft crank.
> >Please note that this is a US Spec car. Rimmer Bros has bugger all for
> >this model.
> >
> >If anyone has one and is willing to part with it (ie. sell it), E-Mail me
> >with terms, etc.
> >
> >Thanks in advance.
> >
> >Dave Massey
> >St. Louis, MO USA
> >
--
"If you can't excel with talent, triumph with effort."
-- Dave Weinbaum in National Enquirer
|