there are 2 types of flashers a rectangular one for the indicators and a
round one for the hazard warning lights at least thats the case on my gt6
-----Original Message-----
From: Peter Zaborski <peterz@merak.com>
To: 'TR6 List' <triumphs@autox.team.net>
Date: Saturday, September 19, 1998 8:25 PM
Subject: lights flashers
>
>Most of the Triumphs I've seen come with some sort of Lucas flasher which
is
>a small rectangular shape. This flasher typically fits into a bracket made
>of springy steel. The bracket is held down by one screw or bolt and the
>springiness holds the flasher in place with the terminals sticking out.
>
>If you go to any auto parts store, the flashers they sell are typically
>cylindrical in shape -- not rectangular. Do these cylindrical flashers fit
>into similar brackets on the mass market cars? I have had no luck finding a
>bracket from the store I bought the round flasher from. So I wonder if
these
>are readily obtained off a 75 parisienne or some other such car I'm likely
>to find at a junk yard.
>
>Any ideas?
>
>(I can make the rectangular bracket fit but would rather have a round one
if
>they exist)
>
>--- Peter Zaborski CF58310UO ---
>
>
|