<<anyone ever tried to alter the oil pressure of a TR2/3/4/4A motor by
changing the oil pressure relief valve setting>>
Ken,
I tried to adjust the oil pressure relief valve to make my low oil pressure
higher...I screwed it 'in an out' to no avail. Then I read the book a second
time and realized I didn't fully understand the key words...'relief valve' -
meaning 'relief' if your oil pressure is to high and 'no relief' if your oil
pressure too low. But then I know you knew this Ken!
Carl
'64 TR4
ps; can't help mesh your gears up ...but as far as 'leak down test' I got
about 10 lb increase across the block with a good squirt of 30wt in the
cylinders.
|