If I remember correctly, the windshield on the TR6 is the same as the 4.
There are two bolts sort of underneath the front fender below the pillar
accessible with the door opened. These must be loosened to remove the
windshield. Also, did you get the obvious three along the dash?
Rick
-----Original Message-----
From: Brian Damkroger <bkdamkr@nmia.com>
To: Triumphs@autox.team.net <Triumphs@autox.team.net>
Date: Tuesday, August 18, 1998 11:51 PM
Subject: TR6 Dash Work Questions
>
>Hi.
>I'm now amidst my dash & crash pad replacement. Like all fine projects,
>this one is becoming more involved as it progresses. If anyone has
>answers to a coupla quick questions, I'd appeciate it.
>
>1) Can I replace the crash pads (in particular, the lower ones) by only
>loosening and moving the metal facia, or do I have to remove it
>completely? I REALLY DON'T want to remove the steering column - I'd
>much rather loosen the clamp bolts and just wiggle the metal dash out a
>ways. Is it possible?
>
>2) Is removing the steering column as big a pain in the rear as it
>sounds?
>
>3) I don't see any way to get at the windshield bracket bolts without
>first getting the lower crash pads out of the way. Is this correct?
>
>4) I think I got the nuts off of the ends of the windshield pillars, but
>it won't budge. I'm assuming that I need the bracket mount bolts loose
>as well. Correct?
>
>Any help/advice/encouragement would be greatly appreciated.
>
>Thanks,
>Brian
>
|