On Wed, 10 Jun 1998, Tony Rhodes wrote:
> I am told that the Diaphragm-Type clutch TR4A and later do
> not require the external return spring located between the
> clutch operating lever and the flange around the slave. My
> 4A does not even have the holes that would accept the spring.
> That being said, I have seen parts pictures for the TR250 which
> DO show the spring! Does your flange have a hole to accept
> the spring? Also, I doubt that it would hurt anything to add the spring...
If you use a carb return spring (like I did!) and don't know that there's
a hole for a spring (like I did!) then it's easy to hook a spring between
the clutch slave fork & something solid (like I did!)
However, I needed the spring, because to my knowledge I have an early TR4
clutch. It might be a 4A clutch, never bothered to look...
-Malcolm
'62(sorta) TR4
|