Studs on exhaust manifold

["Sumner Weisman" <sweisman@gis.net>]

I went through that.  It doesn't matter if they are pressed or threaded in
-- they are frozen in and you have to drill them out.  It's easy since the
manifold is out of the car.  I did it with the manifold installed.  Nuts,
bolts and lock washers will work fine.  Just be sure you use a new gasket. 
It's made of soft metal, not gasket material.

Sumner Weisman
Framingham, Mass.
62 TR3-B