Brian writes...
>I pulled the engine and transmission from my TR6 and have them
>separated. While cleaning up afterwards, I found a single ball bearing
>about 3/16" in diameter on the floor (by the transmission, near the
>engine).
The Spit has one in the shifter used with a spring to keep it from
rattleing....TR6 too?
Cheers!
Tom O'Malley in Southbridge Massachusetts
'74, '77 Spits
>
>Can anyone give me some idea if they may have come from the TR6? I
>swept the floor before I started, but the bearing could have been kicked
>out from something around the edge of the garage or from my neighbors
>side (shared garage) during the removals.
>
>Thanks,
>
>Brian Kemp
>72 TR6
|