triumphs
[Top] [All Lists]

RE: TR-6 Throwout Bearing

To: "'sukey'" <msukey@ix.netcom.com>
Subject: RE: TR-6 Throwout Bearing
From: Bob Hutton <bobhutton@VUT.edu.AU>
Date: Mon, 23 Mar 1998 12:07:55 +1000
Cc: "'triumphs@autox.team.net'" <triumphs@Autox.Team.Net>
Marty,

I've not heard this before, but I'm interested as I'm just about to convert my 
2500TC sedan from a type 35 auto to a 4 speed with OD.

Do you know if these parts also fit the 2500 sedan flywheel and '77 2500 S 
manual box? 

Regards,

Bob Hutton
----------
From:   sukey[SMTP:msukey@ix.netcom.com]
Sent:   Sunday, 22 March 1998 10:26
To:     triumph list
Subject:        TR-6 Throwout Bearing


I am switching over to the new and improved set-up for my 72 TR-6, aka
saab 900 pressure plate and Land cruiser throw out bearing.  Problem is
that the bearing appears wrong.  The auto parts store supplied me with a
"Federated Auto Parts" bearing, P/N 613010.  This was supposed to be a
Land cruiser bearing.  The I.D. of this bearing is only 1.575" compared
to a I.D. of 2.062 for the bearing I removed from the car.  Did the
store just screw up or are there different size bearings for the Land
cruiser?  Any help tracking this down would greatly be appreciated.

Marty .




<Prev in Thread] Current Thread [Next in Thread>