triumphs
[Top] [All Lists]

Re: Cleaning Elec. Connections

To: DANMAS <DANMAS@aol.com>
Subject: Re: Cleaning Elec. Connections
From: Bollen <bollen@ibm.net>
Date: Wed, 28 Jan 1998 20:19:17 -0500
Cc: hutch837@JUNO.COM, triumphs@Autox.Team.Net
References: <5a5d5c68.34cfbba7@aol.com>
DANMAS wrote:
> 
> In a message dated 1/28/98 6:04:43 PM Eastern Standard Time, hutch837@juno.com
> writes:
> 
> >  Is there a liquid which would clean
> >  the connectors? If not, I think I will replace the connectors
> >  rather than struggle cleaning them with a brush.
> 
> Ed,
> 
> If it were me, I would go ahead and replace the female connectors anyway, if
> you've gotten to the point of having them out already.  On my own TR6, when I
> went through the connector cleaning process, I found the metal ferrule had
> crumbled in about 6 or so of them.  When the ferrule crumbles, electrical
> contact is "iffy' at best.  Probably just a matter of time for your's, if they
> are not already goners.  Cheap insurance, in my mind.
> 
> Dan Masters,
> 
I just got some from TRF and was disappointed that they were a hard
shiny plastic rather than the original rubber. Do Moss or VB sell OEM
type?



<Prev in Thread] Current Thread [Next in Thread>