triumphs
[Top] [All Lists]

Re: TR 4/250 trunk lid

To: Kenneth Brown <kbrown@trmx3.dot.ca.gov>
Subject: Re: TR 4/250 trunk lid
From: George Richardson <gprtech@ix.netcom.com>
Date: Fri, 31 Oct 1997 21:20:44 -0500
Cc: triumphs@Autox.Team.Net
Organization: Merlin Group Inc.
References: <s459b67d.055@trmx3.dot.ca.gov>
Kenneth Brown wrote:
> 
> After many hours of work I have finally gotten all the panels straight and
> aligned on my TR 250 and am ready to begin the painting process. The only
> exception is the trunk lid which is giving me fits. The lower right hand 
>corner
> has zero gap on the bottom and side while the lower left corner has a large 
>gap
> at the bottom and the side. Tweaking the lid to add gap to the right corner
> fixes the side gaps but compounds the problem with the bottom left corner. Any
> suggestions on where to go from here?
> 
> TIA
> Ken Brown
> TR 250 owner since 1980

Fill the gap with body solder.
-- 
George Richardson
'57 TR3, TS15559L
(getting ready to paint - and now on the web!)
http://www.merlingroupinc.com/tr3.htm

<Prev in Thread] Current Thread [Next in Thread>