Re: TR-6 Thrust washers

To:	Paul Burr <tigerpb@ids.net>
Subject:	Re: TR-6 Thrust washers
From:	Jim Barbuscia <jim.barbuscia@West.Sun.COM>
Date:	Mon, 13 Oct 1997 18:31:28 -0700 (PDT)
Cc:	DUHART JOHN <duhart@symbol.com>, triumphs@Autox.Team.Net

 Paul,

 I think you have it backwards.
 Oil groves are for oil. It is best to oil parts that move.
 Sorry for adding to the confusion John.

-jimb

http://www.snovalley.com/~monica/jbtr6.html

 P.S. if you think I'm wrong check out the smooth side, it has the size
stamped on it. you don't put this next to your rotating crank!

>John; The side with the oil grooves faces the block. The smooth side,
>which is the actual bearing surface, faces the crankshaft. Simple, eh?

<Prev in Thread]	Current Thread	[Next in Thread>
TR-6 Thrust washers, DUHART JOHN Re: TR-6 Thrust washers, Paul Burr Re: TR-6 Thrust washers, James H. Davis, Jr. Re: TR-6 Thrust washers, Trevor Jordan Re: TR-6 Thrust washers, Jim Barbuscia <= Re: TR-6 Thrust washers, Joe Curry Re: TR-6 Thrust washers, Steve Sutton Re: TR-6 Thrust washers, Joe Curry Fw: TR-6 Thrust washers, Ralph Jannelli Re: TR-6 Thrust washers, Paul Burr Re: TR-6 Thrust washers, James H. Davis, Jr. FW: Re: TR-6 Thrust washers, Mark J Bradakis Re: TR-6 Thrust washers, Jeff Arrowsmith

Previous by Date:	Re: TR-6 Thrust washers, Trevor Jordan
Next by Date:	Doctors, Joe Curry
Previous by Thread:	Re: TR-6 Thrust washers, Trevor Jordan
Next by Thread:	Re: TR-6 Thrust washers, Joe Curry
Indexes:	[Date] [Thread] [Top] [All Lists]