To: | peb3@cornell.edu |
---|---|
Subject: | Re: TR6 prop and half-shafts |
From: | SBollen728@aol.com |
Date: | Fri, 5 Sep 1997 14:31:05 -0400 (EDT) |
Cc: | triumphs@Autox.Team.Net |
Phil, I replaced all my U-joints myself quite easily (after the first one that is) and never had a vibration problem without doing any balancing. Its pretty easy to balance the propshaft by trial and error if you need to, using a hose clip to clamp a 2 ounce lead weight to it and moving it around until you get the right spot. |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Pertronix Ignition epoxy failure, Nicholls, Clark |
---|---|
Next by Date: | Fw: SB 42 update, Damian Penney |
Previous by Thread: | RE: TR6 prop and half-shafts, Richard Ceraldi-ERC004 |
Next by Thread: | driveshaft bolts on TR series, Dave Terrick |
Indexes: | [Date] [Thread] [Top] [All Lists] |