I didnt, instead I used to heat the trunnion with a torch to about 200F
then pump in grease, which would flow into the grooves at that temp like
oil.
----------
From: Ed Carbone <ecarbone@global2000.net>
To: triumphs@autox.team.net
Subject: "oil" front trunnion
Date: Thursday, June 19, 1997 5:32 PM
Hi all,
I have a question, How do you "oil" the front suspention trunnion as
the Bentley book says it must be done?
When attempting to do this with a grease gun, the oil ends up all
over the floor. The vertical link and trunnion have been disassembled
and cleaned.
Any ideas?
TKS
edc.
|