Yes, this is correct. In fact I recently bought some new fuses for my TR-6
from TRF. Genuine Lucas and imprinted was "35A / 17A continuous". If you
don't have the correct fuses handy, use ONLY a 15 amp slow-blow.
I would not be suprised to find that alot of melted wiring harnesses were
caused by the owners mistakenly putting in 'regular' 35Amp slow-blow fuses
'cause the old fuses said 35Amp.......
> From: Michael Galloway <mgx@icesar.epm.ornl.gov>, on 4/8/97 10:56 PM:
> is this really correct? i replace my spit fuses with 30A slowblo's
> per the Hayne's manual spec of 35A.
>
> -- m
>
> On Mon, 7 Apr 1997, Steve Sutton wrote:
>
> > The fuses are in reality 17 amp continuous/ 35 amp surge. You might get
by
> > with normal 15 amp slow-blow fuses if you don't have a handy source for
the
> > correct fuses. Don't put in 35 amp slow-blow fuses though as the wiring
> > harness melts at around 25 amps continuous!
> >
>
>
>
|