I'm getting close to fixing my tail lights. When I began, the left rear
tail-light came on every time I started the car. Headlights and
turn-signals worked but nothing else.
I found the DPO had wired in a trailer harness under the trunk carpet.
I carefully removed all that and finally got both tail-lights working.
But I'm still only getting 0.25 volts at the brake lights and the same
at the pedal switch.
I also found two shorted bulb sockets. So it's helpful to check them
with a meter.
I think I'll save the horn for next year and use one of those horn's
in-a-can from my boat! <g>
<< I'd be checking out every bit of wiring
in and around the column for possible shorting or incorrect connections.
>>
Robb Baugher
73' Stag
Marco Island, FL, USA
|