Greeting Worldly Scions,
I'm playing with questionable carbs off the shelf again.
I've got a manual choke ZS on the car and it won't start.
Fuel is dripping from the carb throat. Too rich perhaps ;-)
I suspected float level, and it was off quite a bit so I adjusted it.
Foolishly I didn't check the needle valve while I was in there.
I'm getting ready to remove & disassemble the carb (again).
Is there anything else in the carb that might cause this condition?
I don't want to have to R&R this carb a third time if I can help it.
The diagphram, needle, damper all look OK. I replaced the
throttle plate w/new already.
The _car_ is fine with another (working) carburettor on it.
Thanks in advance for worldly wisdom offered.
Bob Sykes (s1500@aol.com) - - - __,@_\____
'78 Spitfires - -- }-0-----0->
|