triumphs
[Top] [All Lists]

Re: A Dead Horse named Tires

To: Chad Jester <triumph@igc.net>
Subject: Re: A Dead Horse named Tires
From: Bob Lang <LANG@ISIS.MIT.EDU>
Date: Mon, 05 Aug 1996 17:27:44 -0500 (EST)
Cc: triumphs@autox.team.net
Hi,

Several folks asked for this. The results are based on "tires.xls", a 
spreadsheet that has floated around on the net for quite some time. I am 
not a tire engineer, and I take no responsibility for accuracy.

Note: do not try to go 6500 RPM with your stock TR6 engine!

I came up with 6500, because I wanted to see how many RMP's you need to 
peg the TR6 Speedo. Hey, it was a long night!

Note: 225/60-16 is a nice match, but most racing rules won't let you do 
this and stay "legal". That's the breaks.

I also pre-apologize for any formatting problems, I merely dumped some 
numbers form Excel and read them into a simple text editor. Hopefully, 
the numbers will look okay with minimal editing......

SW  AR WS WW   SW   SH   OD    RPM    RPM  G GR   FDR   Speed  Comments  
185 80 15 5.10 7.28 5.83 26.65 780.38 6500 4 1.00 3.70  139.36 Stock TR6
225 60 16 6.20 8.86 5.31 26.63 781.08 6500 4 1.00 3.70  139.23 "Real Nice match 
for ""low Profile"" tr6 tyre"
215 70 15 5.93 8.46 5.93 26.85 774.66 6500 4 1.00 3.70  140.39 Looks Ideal for 
TR6 Replacement
205 70 15 5.65 8.07 5.65 26.30 790.90 6500 4 1.00 3.70  137.50  
185 65 15 5.10 7.28 4.73 24.47 850.07 6500 4 1.00 3.70  127.93  
205 50 15 5.65 8.07 4.04 23.07 901.57 6500 4 1.00 3.70  120.62 "Probably good 
AutoX tire for 
                                                                TR6, like 4.30 
gears"
225 50 15 6.20 8.86 4.43 23.86 871.82 6500 4 1.00 3.70  124.74  "Ditto to 
above, JK Jackson
                                                                endorses this."
205 60 15 5.65 8.07 4.84 24.69 842.62 6500 4 1.00 3.70  129.06  This is like 
using 4.01 gears
                                                                in the diff.
                                                                                
                
                                                                                
                                
Legend:

SW == Section Width
AR == Aspect Ratio
WS == Wheel Size
WW == Wheel Width
SW == Section Width
SH == Section Height
OD == Overall Diameter
RPM== Revolutions Per Mile
RPM== Engine Revs.
G  == Gear
GR == Gear Ration
FDR== Final Drive Ratio
Speed == Lower speeds indicate relative decrease in speed for equiv. 
engine speed, all drive-line factors considered.

If anybody cares, I can put this info in web-readble form...

rml
-------------------------------------------------------------------------------
Bob Lang                Room 11-221            | This space for rent.
Consultant              MIT Computer Services  |        
Voice: (617)253-7438    FAX: (617)258-9535     |
url: http://web.mit.edu/afs/athena.mit.edu/user/b/l/blang/www/home.html
Quote: I don't need no steeeeenkin' ABS brakes. 
-------------------------------------------------------------------------------


<Prev in Thread] Current Thread [Next in Thread>