>
>Hi Tony,
> David was referring to the two aluminum plugs at the
>ends of the oil galleys in the TR2/3/4 blocks. These are
>threaded aluminum plugs about 3/4" in diameter or so that
>are sealed into the block and hide behind the front plate
>and the bellhousing. I've got a spare stick that I've
>offered him.
>
>cheers,
>
>John Lye
>
>rjl6n@uva.pcmail.Virginia.EDU
>
>
John,
Gotcha'.
I got to thinking about it after I replied. The oil gallery plugs are
standard 1/4 pipe thread and should be available at larger hardware
stores in BRASS.
I remember replacing them now that I have had a chance to think about
it. I did use brass. Nary a leak.
Best Regards,
Tony R.
"GT6s"
###
|