tigers
[Top] [All Lists]

[Tigers] Steering rack

To: tigers@autox.team.net
Subject: [Tigers] Steering rack
From: coolvt--- via Tigers <tigers@autox.team.net>
Date: Tue, 25 Aug 2020 00:46:24 +0000 (UTC)
Delivered-to: mharc@autox.team.net
Delivered-to: tigers@autox.team.net
References: <367840823.5696671.1598309384507.ref@mail.yahoo.com> <367840823.5696671.1598309384507@mail.yahoo.com>
--===============0771950637504443608==
        boundary="----=_Part_5177589_248485935.1598316384291"

------=_Part_5177589_248485935.1598316384291
Content-Transfer-Encoding: quoted-printable

I've filled a few racks=C2=A0 over the years,but=C2=A0 always with the rack=
 off the car. I'm thinking of trying with rack on the car this time. Anyone=
 have a foolproof method of doing this?=C2=A0 Mark L

In a message dated 8/24/2020 6:50:13 PM Eastern Standard Time, tigers@autox=
.team.net writes:=C2=A0
Ditto's on the wanting something better than zip ties.=20
I have seen a similar to the sardine clamp for the vacuum booster on Moss m=
otors. It's close but no cigar. The stainless steel ones would look almost =
too nice.
=C2=A0On Monday, August 24, 2020 tigers-request <tigers@autox.team.net> wro=
te:
Send Tigers mailing list submissions to=C2=A0=C2=A0=C2=A0 tigers@autox.team=
.net=C2=A0To subscribe or unsubscribe via the World Wide Web, visit=C2=A0=
=C2=A0=C2=A0 http://autox.team.net/mailman/listinfo/tigersor, via email, se=
nd a message with subject or body 'help' to=C2=A0=C2=A0=C2=A0 tigers-reques=
t@autox.team.net=C2=A0You can reach the person managing the list at=C2=A0=
=C2=A0=C2=A0 tigers-owner@autox.team.net=C2=A0When replying, please edit yo=
ur Subject line so it is more specificthan "Re: Contents of Tigers digest..=
."=C2=A0=C2=A0Today's Topics:=C2=A0=C2=A0 1. Re: Steering rack (Jay)=C2=A0 =
2. Re: Steering rack (steve wick)=C2=A0=C2=A0------------------------------=
----------------------------------------=C2=A0Message: 1Date: Mon, 24 Aug 2=
020 14:34:00 -0700From: Jay <jay.laifman@gmail.com>To: Tom Witt <atwittsend=
@verizon.net>Cc: Tigers <tigers@autox.team.net>Subject: Re: [Tigers] Steeri=
ng rackMessage-ID: <0A9CFE40-AE38-481E-9F18-15C80B2B4CFF@gmail.com>Content-=
Type: text/plain; charset=3D"utf-8"=C2=A0Here are some options from McMaste=
r Carr.=C2=A0 The first one is one of those squeeze bars types.=C2=A0 The o=
ther is 5/16? wide, which seems to be their most narrow.=C2=A0I know I?ve s=
een more narrow somewhere.=C2=A0https://www.mcmaster.com/hose-clamps/consta=
nt-tension-spring-clamps-for-firm-hose-and-tube/=C2=A0https://www.mcmaster.=
com/hose-clamps/clamp-type~worm-drive/band-width~5-16/=C2=A0=C2=A0On Aug 24=
, 2020, at 2:21 PM, Tom Witt via Tigers <tigers@autox.team.net> wrote:=C2=
=A0Wanting something better than plastic zip ties to secure the boots I ven=
tures to the world of hose clamps. You are correct most are too wide. I sco=
ured through Pick Your Part and found certain BMW clamps (left in image) fr=
om the 80's/90's to not only be narrow enough, but also have a slight bevel=
 on the edge. That said it was still a search to find the clamp in an appro=
priate diameter. I used these on my Tiger rack. I'd assume the midget rack =
boots are similar. Sorry I can't tell you the year/model and location the c=
lamps were used but hopefully it helps with your search. Photo for comparis=
on.=C2=A0<ichnfkdfppofgpgj.png>=C2=A0=C2=A0=C2=A0On 8/24/2020 6:42 AM, cool=
vt--- via Tigers wrote:> > I have the MG Midget steering rack conversion.??=
 I need rubber boots.?? Does it take the same as a standard Tiger??? Also, =
what are good clamps that will work to secure??? Radiator clamps seem a lit=
tle too wide and tend to cut into the boot.?? ??Thanks, Mark L> > > _______=
igers@autox.team.net>> > Donate: http://www.team.net/donate.html <http://ww=
w.team.net/donate.html>> Archive: http://www.team.net/pipermail/tigers <htt=
p://www.team.net/pipermail/tigers> http://autox.team.net/archive <http://au=
tox.team.net/archive>> > Unsubscribe: http://autox.team.net/mailman/options=
/tigers/atwittsend@verizon.net <http://autox.team.net/mailman/options/tiger=
s/atwittsend@verizon.net>> > ______________________________________________=
_=C2=A0tigers@autox.team.net=C2=A0Donate: http://www.team.net/donate.htmlAr=
chive: http://www.team.net/pipermail/tigers http://autox.team.net/archive=
=C2=A0Unsubscribe: http://autox.team.net/mailman/options/tigers/jay.laifman=
@gmail.com=C2=A0=C2=A0=C2=A0-------------- next part --------------An HTML =
attachment was scrubbed...URL: <http://autox.team.net/pipermail/tigers/atta=
chments/20200824/137dc75c/attachment-0001.htm>=C2=A0-----------------------=
-------=C2=A0Message: 2Date: Mon, 24 Aug 2020 22:27:22 +0000From: steve wic=
k <srwick@hotmail.com>To: "tigers@autox.team.net" <tigers@autox.team.net>, =
Tom Witt=C2=A0=C2=A0=C2=A0 <atwittsend@verizon.net>Subject: Re: [Tigers] St=
eering rackMessage-ID:=C2=A0=C2=A0=C2=A0 <BYAPR06MB4726688E29CA6213A9A1EEF1=
D8560@BYAPR06MB4726.namprd06.prod.outlook.com>=C2=A0=C2=A0=C2=A0 Content-Ty=
pe: text/plain; charset=3D"iso-8859-1"=C2=A0What size do you need? A PEX cl=
amp, available at plumbing/home supply stores may work, and is similar to w=
hat auto manufacturers use now.=C2=A0[cid:d5e737fc-a7bd-4c11-b175-ac3df52da=
3fb]=C2=A0This is from the McMaster-Carr catalog.=C2=A0[cid:02be576d-669c-4=
0d6-9f65-5cc9ff9e0cb8]=C2=A0=C2=A0Steve=C2=A0______________________________=
__From: Tigers <tigers-bounces@autox.team.net> on behalf of Tom Witt via Ti=
gers <tigers@autox.team.net>Sent: Monday, August 24, 2020 2:21 PMTo: tigers=
@autox.team.net <tigers@autox.team.net>Subject: Re: [Tigers] Steering rack=
=C2=A0=C2=A0Wanting something better than plastic zip ties to secure the bo=
ots I ventures to the world of hose clamps. You are correct most are too wi=
de. I scoured through Pick Your Part and found certain BMW clamps (left in =
image) from the 80's/90's to not only be narrow enough, but also have a sli=
ght bevel on the edge. That said it was still a search to find the clamp in=
 an appropriate diameter. I used these on my Tiger rack. I'd assume the mid=
get rack boots are similar. Sorry I can't tell you the year/model and locat=
ion the clamps were used but hopefully it helps with your search. Photo for=
 comparison.=C2=A0[cid:part1.6A2F5674.9E614D0F@verizon.net]=C2=A0=C2=A0On 8=
/24/2020 6:42 AM, coolvt--- via Tigers wrote:=C2=A0I have the MG Midget ste=
ering rack conversion.?? I need rubber boots.?? Does it take the same as a =
standard Tiger??? Also, what are good clamps that will work to secure??? Ra=
diator clamps seem a little too wide and tend to cut into the boot.?? ??Tha=
nks, Mark L=C2=A0=C2=A0=C2=A0______________________________________________=
p://www.team.net/donate.htmlArchive: http://www.team.net/pipermail/tigers h=
ttp://autox.team.net/archive=C2=A0Unsubscribe: http://autox.team.net/mailma=
n/options/tigers/atwittsend@verizon.net=C2=A0=C2=A0=C2=A0-------------- nex=
t part --------------An HTML attachment was scrubbed...URL: <http://autox.t=
eam.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment.htm>-----=
--------- next part --------------A non-text attachment was scrubbed...Name=
: ichnfkdfppofgpgj.pngType: image/pngSize: 1554373 bytesDesc: ichnfkdfppofg=
pgj.pngURL: <http://autox.team.net/pipermail/tigers/attachments/20200824/b4=
265bb0/attachment.png>-------------- next part --------------A non-text att=
achment was scrubbed...Name: image.pngType: image/pngSize: 112678 bytesDesc=
: image.pngURL: <http://autox.team.net/pipermail/tigers/attachments/2020082=
4/b4265bb0/attachment-0001.png>-------------- next part --------------A non=
-text attachment was scrubbed...Name: image.pngType: image/pngSize: 73960 b=
ytesDesc: image.pngURL: <http://autox.team.net/pipermail/tigers/attachments=
/20200824/b4265bb0/attachment-0002.png>=C2=A0------------------------------=
=C2=A0Subject: Digest Footer=C2=A0_________________________________________=
______Tigers mailing listTigers@autox.team.nethttp://autox.team.net/mailman=
/listinfo/tigers=C2=A0Donate: http://www.team.net/donate.htmlArchive: http:=
//www.team.net/pipermail/tigers http://autox.team.net/archive=C2=A0=C2=A0--=
----------------------------=C2=A0End of Tigers Digest, Vol 13, Issue 188**=
*************************************______________________________________=
_________

tigers@autox.team.net

Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/coolvt@aol.com



------=_Part_5177589_248485935.1598316384291
Content-Transfer-Encoding: 7bit

<div>
<div class="userEdit" style="font-family: arial, helvetica, sans-serif; 
font-size: 12pt; color: #000000;">
<div><span style="font-family: arial, helvetica, sans-serif; font-size: 12pt; 
color: #000000;">I've filled a few racks&nbsp; over the years,but&nbsp; always 
with the rack off the car. I'm thinking of trying with rack on the car this 
time. Anyone have a foolproof method of doing this?&nbsp; Mark 
L<br><br></span></div>
</div>
In a message dated 8/24/2020 6:50:13 PM Eastern Standard Time, 
tigers@autox.team.net writes:
<div>&nbsp;</div>
<div id="yiv8478543055">
<p dir="ltr">Ditto's on the wanting something better than zip ties. <br>I have 
seen a similar to the sardine clamp for the vacuum booster on Moss motors. It's 
close but no cigar. The stainless steel ones would look almost too nice.</p>
<div class="yiv8478543055device_aol_et_org_dt_dd_quote">&nbsp;</div>
<hr style="border: 0; min-height: 1px; color: #999; background-color: #999; 
width: 100%; margin: 0 0 9px 0; padding: 0;"><span style="font-size: 14px; 
color: #999999;">On Monday, August 24, 2020 tigers-request &lt;<span 
style="color: #0000a0;"><a href="mailto:tigers@autox.team.net"; target="_blank" 
rel="noopener noreferrer">tigers@autox.team.net</a></span>&gt; wrote:</span><br>
<div dir="ltr">Send Tigers mailing list submissions to</div>
<div dir="ltr">&nbsp;&nbsp;&nbsp; <a href="mailto:tigers@autox.team.net"; 
target="_blank" rel="nofollow noopener">tigers@autox.team.net</a></div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">To subscribe or unsubscribe via the World Wide Web, visit</div>
<div dir="ltr">&nbsp;&nbsp;&nbsp; <a 
href="http://autox.team.net/mailman/listinfo/tigers"; target="_blank" 
rel="nofollow noopener">http://autox.team.net/mailman/listinfo/tigers</a></div>
<div dir="ltr">or, via email, send a message with subject or body 'help' 
to</div>
<div dir="ltr">&nbsp;&nbsp;&nbsp; <a 
href="mailto:tigers-request@autox.team.net"; target="_blank" rel="nofollow 
noopener">tigers-request@autox.team.net</a></div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">You can reach the person managing the list at</div>
<div dir="ltr">&nbsp;&nbsp;&nbsp; <a href="mailto:tigers-owner@autox.team.net"; 
target="_blank" rel="nofollow noopener">tigers-owner@autox.team.net</a></div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">When replying, please edit your Subject line so it is more 
specific</div>
<div dir="ltr">than "Re: Contents of Tigers digest..."</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Today's Topics:</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp; 1. Re: Steering rack (Jay)</div>
<div dir="ltr">&nbsp; 2. Re: Steering rack (steve wick)</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div 
dir="ltr">----------------------------------------------------------------------</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Message: 1</div>
<div dir="ltr">Date: Mon, 24 Aug 2020 14:34:00 -0700</div>
<div dir="ltr">From: Jay &lt;<a href="mailto:jay.laifman@gmail.com"; 
target="_blank" rel="nofollow noopener">jay.laifman@gmail.com</a>&gt;</div>
<div dir="ltr">To: Tom Witt &lt;<a href="mailto:atwittsend@verizon.net"; 
target="_blank" rel="nofollow noopener">atwittsend@verizon.net</a>&gt;</div>
<div dir="ltr">Cc: Tigers &lt;<a href="mailto:tigers@autox.team.net"; 
target="_blank" rel="nofollow noopener">tigers@autox.team.net</a>&gt;</div>
<div dir="ltr">Subject: Re: [Tigers] Steering rack</div>
<div dir="ltr">Message-ID: &lt;<a 
href="mailto:0A9CFE40-AE38-481E-9F18-15C80B2B4CFF@gmail.com"; target="_blank" 
rel="nofollow 
noopener">0A9CFE40-AE38-481E-9F18-15C80B2B4CFF@gmail.com</a>&gt;</div>
<div dir="ltr">Content-Type: text/plain; charset="utf-8"</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Here are some options from McMaster Carr.&nbsp; The first one is 
one of those squeeze bars types.&nbsp; The other is 5/16? wide, which seems to 
be their most narrow.</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">I know I?ve seen more narrow somewhere.</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr"><a 
href="https://www.mcmaster.com/hose-clamps/constant-tension-spring-clamps-for-firm-hose-and-tube/";
 target="_blank" rel="nofollow 
noopener">https://www.mcmaster.com/hose-clamps/constant-tension-spring-clamps-for-firm-hose-and-tube/</a></div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr"><a 
href="https://www.mcmaster.com/hose-clamps/clamp-type~worm-drive/band-width~5-16/";
 target="_blank" rel="nofollow 
noopener">https://www.mcmaster.com/hose-clamps/clamp-type~worm-drive/band-width~5-16/</a></div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">On Aug 24, 2020, at 2:21 PM, Tom Witt via Tigers &lt;<a 
href="mailto:tigers@autox.team.net"; target="_blank" rel="nofollow 
noopener">tigers@autox.team.net</a>&gt; wrote:</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Wanting something better than plastic zip ties to secure the 
boots I ventures to the world of hose clamps. You are correct most are too 
wide. I scoured through Pick Your Part and found certain BMW clamps (left in 
image) from the 80's/90's to not only be narrow enough, but also have a slight 
bevel on the edge. That said it was still a search to find the clamp in an 
appropriate diameter. I used these on my Tiger rack. I'd assume the midget rack 
boots are similar. Sorry I can't tell you the year/model and location the 
clamps were used but hopefully it helps with your search. Photo for 
comparison.</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&lt;ichnfkdfppofgpgj.png&gt;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">On 8/24/2020 6:42 AM, coolvt--- via Tigers wrote:</div>
<div dir="ltr">&gt; </div>
<div dir="ltr">&gt; I have the MG Midget steering rack conversion.?? I need 
rubber boots.?? Does it take the same as a standard Tiger??? Also, what are 
good clamps that will work to secure??? Radiator clamps seem a little too wide 
and tend to cut into the boot.?? ??Thanks, Mark L</div>
<div dir="ltr">&gt; </div>
<div dir="ltr">&gt; </div>
<div dir="ltr">&gt; _______________________________________________</div>
<div dir="ltr">&gt; </div>
<div dir="ltr">&gt; <a href="mailto:tigers@autox.team.net"; target="_blank" 
rel="nofollow noopener">tigers@autox.team.net</a> &lt;mailto:<a 
href="mailto:tigers@autox.team.net"; target="_blank" rel="nofollow 
noopener">tigers@autox.team.net</a>&gt;</div>
<div dir="ltr">&gt; </div>
<div dir="ltr">&gt; Donate: <a href="http://www.team.net/donate.html"; 
target="_blank" rel="nofollow noopener">http://www.team.net/donate.html 
</a>&lt;<a href="http://www.team.net/donate.html"; target="_blank" rel="nofollow 
noopener">http://www.team.net/donate.html</a>&gt;</div>
<div dir="ltr">&gt; Archive: <a href="http://www.team.net/pipermail/tigers"; 
target="_blank" rel="nofollow noopener">http://www.team.net/pipermail/tigers 
</a>&lt;<a href="http://www.team.net/pipermail/tigers"; target="_blank" 
rel="nofollow noopener">http://www.team.net/pipermail/tigers</a>&gt; <a 
href="http://autox.team.net/archive"; target="_blank" rel="nofollow 
noopener">http://autox.team.net/archive </a>&lt;<a 
href="http://autox.team.net/archive"; target="_blank" rel="nofollow 
noopener">http://autox.team.net/archive</a>&gt;</div>
<div dir="ltr">&gt; </div>
<div dir="ltr">&gt; Unsubscribe: <a 
href="http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net"; 
target="_blank" rel="nofollow 
noopener">http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net 
</a>&lt;<a 
href="http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net"; 
target="_blank" rel="nofollow 
noopener">http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net</a>&gt;</div>
<div dir="ltr">&gt; </div>
<div dir="ltr">&gt; </div>
<div dir="ltr">_______________________________________________</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr"><a href="mailto:tigers@autox.team.net"; target="_blank" 
rel="nofollow noopener">tigers@autox.team.net</a></div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Donate: <a href="http://www.team.net/donate.html"; 
target="_blank" rel="nofollow 
noopener">http://www.team.net/donate.html</a></div>
<div dir="ltr">Archive: <a href="http://www.team.net/pipermail/tigers"; 
target="_blank" rel="nofollow noopener">http://www.team.net/pipermail/tigers 
</a><a href="http://autox.team.net/archive"; target="_blank" rel="nofollow 
noopener">http://autox.team.net/archive</a></div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Unsubscribe: <a 
href="http://autox.team.net/mailman/options/tigers/jay.laifman@gmail.com"; 
target="_blank" rel="nofollow 
noopener">http://autox.team.net/mailman/options/tigers/jay.laifman@gmail.com</a></div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">-------------- next part --------------</div>
<div dir="ltr">An HTML attachment was scrubbed...</div>
<div dir="ltr">URL: &lt;<a 
href="http://autox.team.net/pipermail/tigers/attachments/20200824/137dc75c/attachment-0001.htm";
 target="_blank" rel="nofollow 
noopener">http://autox.team.net/pipermail/tigers/attachments/20200824/137dc75c/attachment-0001.htm</a>&gt;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">------------------------------</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Message: 2</div>
<div dir="ltr">Date: Mon, 24 Aug 2020 22:27:22 +0000</div>
<div dir="ltr">From: steve wick &lt;<a href="mailto:srwick@hotmail.com"; 
target="_blank" rel="nofollow noopener">srwick@hotmail.com</a>&gt;</div>
<div dir="ltr">To: "<a href="mailto:tigers@autox.team.net"; target="_blank" 
rel="nofollow noopener">tigers@autox.team.net</a>" &lt;<a 
href="mailto:tigers@autox.team.net"; target="_blank" rel="nofollow 
noopener">tigers@autox.team.net</a>&gt;, Tom Witt</div>
<div dir="ltr">&nbsp;&nbsp;&nbsp; &lt;<a href="mailto:atwittsend@verizon.net"; 
target="_blank" rel="nofollow noopener">atwittsend@verizon.net</a>&gt;</div>
<div dir="ltr">Subject: Re: [Tigers] Steering rack</div>
<div dir="ltr">Message-ID:</div>
<div dir="ltr">&nbsp;&nbsp;&nbsp; &lt;<a 
href="mailto:BYAPR06MB4726688E29CA6213A9A1EEF1D8560@BYAPR06MB4726.namprd06.prod.outlook.com";
 target="_blank" rel="nofollow 
noopener">BYAPR06MB4726688E29CA6213A9A1EEF1D8560@BYAPR06MB4726.namprd06.prod.outlook.com</a>&gt;</div>
<div dir="ltr">&nbsp;&nbsp;&nbsp; </div>
<div dir="ltr">Content-Type: text/plain; charset="iso-8859-1"</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">What size do you need? A PEX clamp, available at plumbing/home 
supply stores may work, and is similar to what auto manufacturers use now.</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">[cid:d5e737fc-a7bd-4c11-b175-ac3df52da3fb]</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">This is from the McMaster-Carr catalog.</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">[cid:02be576d-669c-40d6-9f65-5cc9ff9e0cb8]</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Steve</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">________________________________</div>
<div dir="ltr">From: Tigers &lt;<a href="mailto:tigers-bounces@autox.team.net"; 
target="_blank" rel="nofollow noopener">tigers-bounces@autox.team.net</a>&gt; 
on behalf of Tom Witt via Tigers &lt;<a href="mailto:tigers@autox.team.net"; 
target="_blank" rel="nofollow noopener">tigers@autox.team.net</a>&gt;</div>
<div dir="ltr">Sent: Monday, August 24, 2020 2:21 PM</div>
<div dir="ltr">To: <a href="mailto:tigers@autox.team.net"; target="_blank" 
rel="nofollow noopener">tigers@autox.team.net</a> &lt;<a 
href="mailto:tigers@autox.team.net"; target="_blank" rel="nofollow 
noopener">tigers@autox.team.net</a>&gt;</div>
<div dir="ltr">Subject: Re: [Tigers] Steering rack</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Wanting something better than plastic zip ties to secure the 
boots I ventures to the world of hose clamps. You are correct most are too 
wide. I scoured through Pick Your Part and found certain BMW clamps (left in 
image) from the 80's/90's to not only be narrow enough, but also have a slight 
bevel on the edge. That said it was still a search to find the clamp in an 
appropriate diameter. I used these on my Tiger rack. I'd assume the midget rack 
boots are similar. Sorry I can't tell you the year/model and location the 
clamps were used but hopefully it helps with your search. Photo for 
comparison.</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">[cid:<a href="mailto:part1.6A2F5674.9E614D0F@verizon.net"; 
target="_blank" rel="nofollow 
noopener">part1.6A2F5674.9E614D0F@verizon.net</a>]</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">On 8/24/2020 6:42 AM, coolvt--- via Tigers wrote:</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">I have the MG Midget steering rack conversion.?? I need rubber 
boots.?? Does it take the same as a standard Tiger??? Also, what are good 
clamps that will work to secure??? Radiator clamps seem a little too wide and 
tend to cut into the boot.?? ??Thanks, Mark L</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">_______________________________________________</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr"><a href="mailto:tigers@autox.team.net"; target="_blank" 
rel="nofollow noopener">tigers@autox.team.net</a>&lt;mailto:<a 
href="mailto:tigers@autox.team.net"; target="_blank" rel="nofollow 
noopener">tigers@autox.team.net</a>&gt;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Donate: <a href="http://www.team.net/donate.html"; 
target="_blank" rel="nofollow 
noopener">http://www.team.net/donate.html</a></div>
<div dir="ltr">Archive: <a href="http://www.team.net/pipermail/tigers"; 
target="_blank" rel="nofollow noopener">http://www.team.net/pipermail/tigers 
</a><a href="http://autox.team.net/archive"; target="_blank" rel="nofollow 
noopener">http://autox.team.net/archive</a></div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Unsubscribe: <a 
href="http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net"; 
target="_blank" rel="nofollow 
noopener">http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net</a></div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">-------------- next part --------------</div>
<div dir="ltr">An HTML attachment was scrubbed...</div>
<div dir="ltr">URL: &lt;<a 
href="http://autox.team.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment.htm";
 target="_blank" rel="nofollow 
noopener">http://autox.team.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment.htm</a>&gt;</div>
<div dir="ltr">-------------- next part --------------</div>
<div dir="ltr">A non-text attachment was scrubbed...</div>
<div dir="ltr">Name: ichnfkdfppofgpgj.png</div>
<div dir="ltr">Type: image/png</div>
<div dir="ltr">Size: 1554373 bytes</div>
<div dir="ltr">Desc: ichnfkdfppofgpgj.png</div>
<div dir="ltr">URL: &lt;<a 
href="http://autox.team.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment.png";
 target="_blank" rel="nofollow 
noopener">http://autox.team.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment.png</a>&gt;</div>
<div dir="ltr">-------------- next part --------------</div>
<div dir="ltr">A non-text attachment was scrubbed...</div>
<div dir="ltr">Name: image.png</div>
<div dir="ltr">Type: image/png</div>
<div dir="ltr">Size: 112678 bytes</div>
<div dir="ltr">Desc: image.png</div>
<div dir="ltr">URL: &lt;<a 
href="http://autox.team.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment-0001.png";
 target="_blank" rel="nofollow 
noopener">http://autox.team.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment-0001.png</a>&gt;</div>
<div dir="ltr">-------------- next part --------------</div>
<div dir="ltr">A non-text attachment was scrubbed...</div>
<div dir="ltr">Name: image.png</div>
<div dir="ltr">Type: image/png</div>
<div dir="ltr">Size: 73960 bytes</div>
<div dir="ltr">Desc: image.png</div>
<div dir="ltr">URL: &lt;<a 
href="http://autox.team.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment-0002.png";
 target="_blank" rel="nofollow 
noopener">http://autox.team.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment-0002.png</a>&gt;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">------------------------------</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Subject: Digest Footer</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">_______________________________________________</div>
<div dir="ltr">Tigers mailing list</div>
<div dir="ltr"><a href="mailto:Tigers@autox.team.net"; target="_blank" 
rel="nofollow noopener">Tigers@autox.team.net</a></div>
<div dir="ltr"><a href="http://autox.team.net/mailman/listinfo/tigers"; 
target="_blank" rel="nofollow 
noopener">http://autox.team.net/mailman/listinfo/tigers</a></div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">Donate: <a href="http://www.team.net/donate.html"; 
target="_blank" rel="nofollow 
noopener">http://www.team.net/donate.html</a></div>
<div dir="ltr">Archive: <a href="http://www.team.net/pipermail/tigers"; 
target="_blank" rel="nofollow noopener">http://www.team.net/pipermail/tigers 
</a><a href="http://autox.team.net/archive"; target="_blank" rel="nofollow 
noopener">http://autox.team.net/archive</a></div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">------------------------------</div>
<div dir="ltr">&nbsp;</div>
<div dir="ltr">End of Tigers Digest, Vol 13, Issue 188</div>
<div dir="ltr">***************************************</div>
</div>
_______________________________________________<br><br><a 
href="mailto:tigers@autox.team.net";>tigers@autox.team.net</a><br><br>Donate: <a 
href="http://www.team.net/donate.html"; target="_blank" 
rel="noopener">http://www.team.net/donate.html</a><br>Archive: <a 
href="http://www.team.net/pipermail/tigers"; target="_blank" 
rel="noopener">http://www.team.net/pipermail/tigers </a><a 
href="http://autox.team.net/archive"; target="_blank" 
rel="noopener">http://autox.team.net/archive</a><br><br>Unsubscribe: <a 
href="http://autox.team.net/mailman/options/tigers/coolvt@aol.com"; 
target="_blank" 
rel="noopener">http://autox.team.net/mailman/options/tigers/coolvt@aol.com</a><br><br><br></div>
------=_Part_5177589_248485935.1598316384291--

--===============0771950637504443608==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________

tigers@autox.team.net

Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net



--===============0771950637504443608==--

<Prev in Thread] Current Thread [Next in Thread>