Joel:
I'm at work right now and do not have access to my copy of TBON, but I seem to
recall that the MkIIs had stock steel wheels that were painted a silver color
on both sides, while the Mk1 and Mk1A wheels were painted black on the inside
of the wheel and white on the outside. If I'm not mistaken, I believe the
correct color ID for the outside wheel color was "Seafoam Gray," or something
like that. I contacted Tower Paint in Appleton, WI, years ago and gave them
the afore-mentioned name of the correct Rootes color and they were able to mix
me several cans of it to spray my wheels with.
Jay was correct in his description of the spray method. The wheels were
evidently painted black and then the "Seafoam Gray" was applied to the outside
surface of the wheel with no effort by the factory to mask off the inside
surface. It is proper to have a little overspray come through and land on the
black surface of the inside of the wheel, so don't worry about that.
Hope this helps,
Andy
---- Joel Martin via Tigers <tigers@autox.team.net> wrote:
> Tom
> What I find for the MK II, silver is correct but Mk 1A's are different.
>
>
>
> MK 1A owners or knowledgeable persons?
>
> Joel
>
>
> On Wednesday, September 30, 2015 10:15 AM, Tom Parker
> <tkparker1941@gmail.com> wrote:
>
>
> For what it's worth, my Mark 2 rims are grey on both sides, no evidence
> obvious of any black paint on the rear. As far as I know the wheels are
> original, untouched (the condition of the car when I bought it in 1976 was,
> at best, "rough," I doubt the rims were repainted.
> Tom'67 Mark 2
> On Wed, Sep 30, 2015 at 9:50 AM, Joel Martin via Tigers
> <tigers@autox.team.net> wrote:
>
> My trunk is finally complete except for the spare tire,wheel and lug nuts
> that would go with whatever wheel is used. I still have some questions and
> here is what I havefound so far. Dunlop 590 x 13â?? RS5 with a 1â?? white
> sidewall orGoodyear â??Made in England 600 x 13â?? Roadway Speed with a
> 1â??white sidewall Wheel â?? standard steel 4-1/2â?? x 13â?? rimPainted
> black â?? Is this gloss black or another black, semi,satin, flat?Then
> re-sprayed a gray-white on the front â?? what does thismean? The entire
> front of the wheel/rimor just a portion? Any rattle can paintcan number
> anyone could provide? I would like to find a current tire replacement
> â??sizeâ??,165x80x13 as an example of what matches the 590x13â?? or
> 600x13â??designation. What does 590 or 600x13translate to? Does anyone
> have a picture of what the wheel and tire shouldbe from the front with the
> 1â?? white sidewall and this â??gray-white on the frontâ??is suppose to look
> like that they would share? I have some LAT wheels with the markings on the
> inside ofâ??SRC 1300, 5.5 X 1300, patent pending, ?celes cali?â??   As
> measured from the inside of the lip, they are 5.5â?? wide. The steel wheel,
> chrome ring and cap that I have is 4.5â??wide from the inside of the lip but
> has no markings on it that I can find,inside or outside. Should there
> be?Please see attached picture and tell me if this is a correct Tiger MK 1A
> sparewheel or what this might have come off of? I have had this wheel for so
> many years and no idea where I got it. Thanks again for sharing your
> knowledge. RegardsJoel Martin
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/tkparker1941@gmail.com
>
>
>
>
>
>
>
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|