Michael, Listers
The clutch could be dragging. Take hold of the clutch push
rod and force it
forward (toward the bleeder), seating the piston in the
slave cylinder (watch
the reservoir doesn't over flow). Immediately move
the push rod back and forth
between the clutch arm and the slave to check for
end play. If it exists, adjust
the rod longer, leaving a little clearance. As
you adjust, keep checking that
the piston remains seated as it may creep to
the rear while unloaded.
Regards,
Pete Phelps
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|