Joe
I believe if you run a straight line across the opening at the body
sheet metal, set the finisher inboard on that line; the fastener holes will
be at the center line of the finisher.
There are only 4 fasteners. Difficult to get at the Front of my Tiger
right now but the center 2 seem to be about 4" from the center of the grille
and the outer ones seem to be about 4" from the ends.
The part numbers for that finisher and the side mouldings fasteners are
different but that does not mean they will not work. I used a butterfly
style clip with a nut to hold mine down. I have the number for that clip
somewhere; I just need to look for it.
Ron Fraser
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Joe Brown
Sent: Sunday, January 22, 2012 1:08 PM
To: tigers@autox.team.net
Subject: [Tigers] Lower Grill Trim
Hi,
Can anybody send me a good photo showing exactly where the lower grill
"finisher" trim sits on the front valence? When body work was done on my
car the holes were filled in and I can't find where they were. From digging
through the archives I found that this piece of trim uses the same fasteners
as the side trim. But I'm not sure how many fasteners there were.
Thanks,
Joe Brown
Arlington, TX
B382000217
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1901 / Virus Database: 2109/4755 - Release Date: 01/20/12
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|