Hello,
To clarify on the bumper hardware, I got several replys indicating that I
misled some folks. In the spirit of clarity:
No not those pieces that are curved (to mate with bumper) on one side and
flat on the other.
This is a little barrel affair with a hole in the middle, 3/4" long, an
inch in diameter and a half inch hole in the center drilled through the 3/4
inch dimension.
Jim
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|