Hello,
Last night, Tod Brown and went over the fixing bolts for the bumpers. A
couple of issues/questions arose.
1) the bumper to chassis fixing bolts for the rear are listed as 1/2" X 1
3/4 UNF. For the front it lists a
screw (?) of 1/2" X 1" UNF. Bolt for one, and screw for another? Dim
memory tells me the difference between a screw and a bolt is the a screw is
threaded up to the head, and a bolt has an unthreaded section between the
threads and the head. Also, how come the difference in length here?
2) As I'm trying to assemble a complete set of front and rear bumpers with
everything, ready to bolt on when I take off the old. There is an odd part
that must have some connection with the bumper system as I found it in
that box in the basement. It is a slug of aluminum (?) cylindrical (very
slightly barrel shaped) 1/2" tall, 1" in diameter with about a 1/2" hole
drilled
out of the center. Is this a bumper system part? Where does it go?
Seems like a spacer.
Best to all,
Jim Armstrong
Mk 1A
382002083
LRXFE
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|