I can conclusively say that the Autometer sensor does not work accurately
with the standard gauge. From memory it reads way too high.
Wally Menke
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Ron Fraser
Sent: Friday, 1 April 2011 11:00 AM
To: 'James Lindner'; tigers@autox.team.net
Subject: Re: [Tigers] Temp Gauge Accuracy
Jim
This is a post from several years ago from Tom Prager maybe it will
help.
On Behalf Of Thomas Prager
> Sent: Monday, September 04, 2006 10:18 AM
> To: tigers_United_forum
> Subject: sending unit for Edelbrock manifold
>
>
> A good solution to the temperature sender "problem" is to buy an
> AutoMeter temp sender and screw it in. It runs the stock gauge
> PERFECTLY. It costs about $20 and comes with several thread adapters.
> The Autometer temperature sender that will work with the stock Jaeger
> gauge is Model 2254.
>
> tom
__________ Information from ESET Smart Security, version of virus signature
database 6013 (20110404) __________
The message was checked by ESET Smart Security.
http://www.eset.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|