Dwain
The lower finisher had large round pop rivites aka the side strip pop
rivets.
I still have som NOS ones. A poor way to hold the strip. I used some
GM molding clips I found in the parts store. The have two strings on
either
end of a trapezoid plate. I clipped off the springs and found it to
slide
inside the finisher. The plate already had a threaded stud. I found
some
nylon nuts that fit (no tust). When installing I found the paint had
made the
monting holes to small. A simple drill fixed that.
Remember when repainting,
the area behind the strip is black not body
color. In fact the whole area
behind the grill aurraond is black. A mistake
most painters fix. Rumor is
this area was not spray painted but hand
brush painted. Marketing wanted the
chrome cross bars to appear
to be floating in a black area. The same
marketers had the rockers of
the MK II painted black under the chrome stide
strips under the stripes
Marketing felt the effect would make the MK IIs to
look lower.
Dave
________________________________
From: Owain Lloyd
<owain.lloyd@gmail.com>
To: Graham Harlowe <gharlowe@comcast.net>
Cc:
"tigers@autox.team.net" <tigers@autox.team.net>
Sent: Sat, October 9, 2010
11:37:17 AM
Subject: Re: [Tigers] Lower Grill Finisher Fasteners
about 5 is
enough. a flat plate with threaded rod coming out the
middle. you can file
the sides of thre plate so it become just wide
enough to slide into the
stainless strip. then put bolts and washers
underneath.
On Saturday, October
9, 2010, Graham Harlowe <gharlowe@comcast.net> wrote:
> All -
>
> I'll be
installing the lower grill finisher soon. (This is the stainless
> trim that
fastens to the top of front valance.) My front valance has been
> replaced
and I don't recall how many fasteners were used to attach this
> piece, nor
their locations. Can anyone provide an estimate for how many
> fasteners were
used and approximately where along the piece they were
> located (i.e. where
to drill the holes in the valance)? Also, any
> recommendations what to use
as fasteners to attach/retain this piece?
>
> Thanks much, as always...
>
>
Cheers,
> Graham Harlowe
> B382001466
>
_______________________________________________
> Tigers@autox.team.net
>
Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/owain.lloyd@gmail.com
_______________________________________________
Tigers@autox.team.net
Donate:
http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/djoh797014@yahoo.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|