The radiator mounts pretty solidly to the body. If it's screwed down
tight the only way it can vibrate is if the body is vibrating. I suppose if
the engine was vibrating too much it could cause problems around the point
where the hose attaches to the radiator on the passenger side. But, I would
think that the hose would absorb the vibration.
I'll be curious to hear what others have to say on this.
Mark
In a message dated 9/17/2010 10:52:05 A.M. Eastern Daylight Time,
wsamouce@kc.rr.com writes:
Morning list,
I had to pull my radiator this week to have it repaired, started leaking
in the lower right corner. Radiator was recored about a year ago. Just
called the shop and the radiator guy thinks that there is a vibration problem
that caused the leak in such a short time.
So, my question - has anyone used any king of rubber mount for the
radiator to the frame? As you know, there is not much room to be moving the
radiator in.
Final push before the 3200 mile trip to Maine and back next month.
TIA!
Duke
B382002037
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/coolvt@aol.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|