Hello Erich,
That's the data I was looking for. As you rightly put it, if repros are
available, the lack of rebuild parts, the "sealed systemness" and the
tediousness of it all completely argue against it. Thanks for taking the time
to
write.
Jim Armstrong
In a message dated 8/18/2010 10:32:58 A.M. Eastern Daylight Time,
e.coiner@cox.net writes:
There is a rubber domed "diaphragm" that seals the shat, There is a disc
seal that seals against the bottom of the valve.
Nobody I know makes those parts. Would love to know if they do.
It is extremely tedious to undo the crimps in the casting so that they can
be redone after reassembly.
Sometimes you find that the conical metal seal surface at the bottom of
the valve body is corroded and you would have to machine the surface down in
the bottom of the hole.
Now that the mk1A type valve are available as a reproduction, I will never
take an original apart again.
Erich
---- Rollright@aol.com wrote:
> Hello,
>
> As I mentioned in my note, I called Classic Sunbeam, with no luck and,
> Sunbeam Specialties who did indeed have them (at half the price I might
add of
> the folks you recommended. BTW, there seems to be two repros out there.
The
> one you bring to our attention has no machining step to reduce its
right
> angle connection, where the one pictured under MGC has the step that
> connects up to our cars with no mods.
>
> see:
_http://www.kirks-auto.com/MGC/MGC_HeaterControlValve_LaterStyle.html_
> (http://www.kirks-auto.com/MGC/MGC_HeaterControlValve_LaterStyle.html)
> vs: _http://www.reisentzrestorations.com_
> (http://www.reisentzrestorations.com)
>
> But the point really is, can they be rebuilt, like brake or clutch
master
> cylinders? That was my question. Has anybody successfully rebuilt one?
>
> Jim Armstrong
>
>
>
> In a message dated 8/18/2010 8:40:21 A.M. Eastern Daylight Time,
> garywinblad@comcast.net writes:
>
> http://www.reisentzrestorations.com/
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/e.coiner@cox.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|