I certainly agree that Tim's air dam is effective when the car is in motion.
However, on the way back from SUNI we crossed the Mojave Desert when the the
temperature was relatively cool - only 102. The water temperature gauge
indicated 200 which we know means the return water was 180, probably too
cool. This was with a modern aluminum radiator and a small, 13" Derale fan.
However when I was stopped or barely moving for 15 to 30 minutes, waiting in
a line at the Agriculture Inspection Station, the actual temperature rose to
240 by the time I cleared the line.
The problem most Tigers have with overheating is when the Tiger is stopped
or is in stop and go conditions. Tim addressed this low speed problem by
installing an electric (pusher) fan in front of the radiator. After my
recent experience, I'm thinking about doing the same (exept I'll hook mine
up to a big red "Panic" button). ;-)
An earlier post mentioned the theoretical disadvange to propping a hood open
for engine compartment ventilation. (Reasoning that venting into a high
pressure region is difficult) I'd like to point out that when a Tiger's
hood latch is not operational, that a stock steel hood will "lift off"
around 70mph (depending on headwind/tailwind). We discussed this at SUNI and
the consensus is that it will only lift seveal inches and then levels out.
However I have seen the light weight LAT hoods still lifting at 6" up,
enough to force a race driver off the track. The lifting hoods indicate to
me that a higher pressure can vent nicely into a high pressure area.
Buck Trippel
----- Original Message -----
From: "J. Nichols" <jxnichols@sbcglobal.net>
To: <tigers@autox.team.net>
Sent: Friday, July 03, 2009 6:42 PM
Subject: [Tigers] I'll Be Dammed!
> "The air dam that Tim Ronack designed and sold is very effective. It
> shears
> air just below the cross member and causes a low pressure behind the
> radiator. The faster the car the more effective it becomes. The air dam
> is
> very easy to install and when painted black, it disappears. Robin Young"
>
>
> You can get the same affect by mounting a period UK license plate using
> the
> stock bracket under the bumper. Although, your state has to allow that
> type
> of plate mounted on the front of the car like Michigan does.
>
>
> Jeff
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|