Summit has a crank dampner that works fine. There is a casting vein that
needs to be trimmed on the Tiger Timing cover for clearance of the 50
oz. dampner. Comes set up with 3 or 4 hole pulley mounts and adapters for
other spacing (not needed with the 3 inch stock 260-289-302 height). Part
number is SUM-163289 $69.95 plus shipping.
Chris
Listers. I have used a March set of pulleys for a 3 bolt early Mustang on my
Tiger, but had to modify the crank pulley by cutting on a lathe and
rewelding
and smoothing to get the correct shorted depth, adjusted the waterpump
pulley.............
, Clyde
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|