Sandy,
Here is an "online" displacement table relating bore and stroke to CID.
http://www.pawengineparts.com/charts/Conversion_Chart_CI.html
Here is the calculation formula for this table:
/"Bore x Bore x Stroke X .7854 x Number of cylinders. For example: A460,
Ford, .030 will be: 4.390 x 4.390 x 3.850 x .7854 x 8 = 466.19." "Bore
x Bore" is shorthand for Bore Squared.
/
You will have to use the formula if your stroke is below 3.00 inches, or
above 4.5 inches, or your bore is less than 3.76 inches or larger than
4.5625 inches. Same for steps between those on the table.
Hey, it's free.
Lowest CID tabled is 263 CID.
Now, if you have Excel, as you do (Sandy) this equation can be used to
create exact numbers for for alternate choices.
Steve
___
Steve Laifman
Editor - TigersUnited.com
<http://www.TigersUnited.com>
Sandy Ganz wrote:
> I just started adding in the tools to the main site with some better
>navigation (not much)...
>
> http://www.gtsparkplugs.com/CarbCFMCalc.html
> http://www.gtsparkplugs.com/GearCalc.html
> http://www.gtsparkplugs.com/TireCalculator.html
>
> Next Up -
> Fuel Injector size Calculator
> Compression Raito Calculator
>
> Other Suggestions???
>
> Sandy
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|