Well one concern is the large hole in a sheet metal frame, and I'm wondering
if the lack
of one might be the reason the car seems so eager to oversteer in a tight
corner. I have
traction bars and Koni shocks, so the wheel hop hasn't really been a problem
so far. Out
of curiosity, why were the springs a poor design? They look fairly
conventional to me, just
smaller.
Steve
----- Original Message -----
From: Duke Samouce<mailto:wsamouce@kc.rr.com>
To: 'steve wick'<mailto:srwick@hotmail.com> ;
'tigers'<mailto:tigers@autox.team.net>
Sent: Saturday, September 06, 2008 6:13 AM
Subject: RE: [Tigers] E-Brake Cable
Why replace a poorly engineered piece of equipment? I do not have a
panhard
rod or traction bars installed and have no problems with wheel hop. I can
do some nice burn-outs too. I do have Dales springs installed. The
panhard
and traction bars were installed due to the original spring poor design.
Duke
B382002037
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|