Why replace a poorly engineered piece of equipment? I do not have a panhard
rod or traction bars installed and have no problems with wheel hop. I can
do some nice burn-outs too. I do have Dales springs installed. The panhard
and traction bars were installed due to the original spring poor design.
Duke
B382002037
-----Original Message-----
From: tigers-bounces+wsamouce=kc.rr.com@autox.team.net
[mailto:tigers-bounces+wsamouce=kc.rr.com@autox.team.net] On Behalf Of steve
wick
Sent: Friday, September 05, 2008 10:20 PM
To: tigers
Subject: [Tigers] E-Brake Cable
I've discovered a missing panhard bar and a hole in my frame where the mount
used to be. Looks
like this winter I'll be getting Tom's kit and doing some welding.
Steve
You are subscribed as wsamouce@kc.rr.com
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|