Yes, I got a Denso from powermaster, but you can find them on ebay for much
less. One wire types too. You may also be able to find bracket for them from
Moroso but will need some work I'm guessing, I have it, but have not set it up
yet. Also I think Paul Reisents has a stock looking bracket that will take a
late model Ford or GM alternator.
http://www.reisentzrestorations.com/parts/parts.htm
Here is the link from Theo's site I think ;-)
http://members.shaw.ca/tsmit/alternator/alternator.html
----- Original Message ----
From: "Smit, Theo" <Theo.Smit@dynastream.com>
To: Arnie Sugar <ASugar@hwageo.com>; tigers@autox.team.net
Sent: Tuesday, November 13, 2007 11:21:19 AM
Subject: Re: [Tigers] Generator/Alternator??? (Smit, Theo)
Hi Arnie,
Thanks for the tip, I'll be curious to check it out. The one I'm
currently using is off a Toyota, made by Denso. Most of the other newer
ones I've been looking at are also Denso products... All of the Japanese
manufacturers use them, similar to how most German manufacturers end up
using Bosch parts.
Theo
-----Original Message-----
From: tigers-bounces+theo.smit=dynastream.com@autox.team.net
[mailto:tigers-bounces+theo.smit=dynastream.com@autox.team.net] On
Behalf Of Arnie Sugar
Sent: November 13, 2007 12:18 PM
To: tigers@autox.team.net
Subject: [Tigers] Generator/Alternator??? (Smit, Theo)
Theo,
I found a small 55 amp one wire alternator that fits nicely in front of
the head. If you promise not to tell anyone, I'll disclose its off a
Hyundai (I know, its shameful). No big CAT bracket required, just a big
bolt w/ spacers right into the head and a standard slotted belt tension
bracket. I can look up the part # tonight.
Arnie
-------------------
Message: 13
Date: Tue, 13 Nov 2007 07:41:53 -0700
From: "Smit, Theo" <Theo.Smit@dynastream.com>
Subject: Re: [Tigers] Generator/Alternator???
To: "Don Wheeler" <DWheeler@dopplegangers.net>,
<tigers@autox.team.net>
..... other stuff to do on my Tiger right now, but I'm looking again to
find an alternator that is short enough to mount in front of the right
side head (with standard pulley setup) so that I can make the
arrangement more compact than it is now. ......
_______________________________________________
theo.smit@dynastream.com
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
_______________________________________________
sganz@pacbell.net
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
_______________________________________________
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
|