Stu,
The FLIA is the highest rated filter available. It isn't a corner
"grind", just a little filing. There was an article showing the
"insides" of filters, although I don't recall the web site, but you'd be
surprised at the internal differences.
___
Steve Laifman
Editor - TigersUnited.com
Stu Brennan wrote:
>Scott:
>
>I have the Motorsports adapter on my Tiger, and it makes things much
>easier. I use the Motorcraft FL400 filters (Fram PH3600) commonly
>available at Walmart, etc. These have the same thread, gasket size,
>pressure specs as the FL1A (PH8A) standard filter, but the diameter is
>smaller. I didn't grind that bit off the motor mount, so the larger one
>will not fit.
>
>I'm just down in Wrentham, so you are welcome to come see it anytime.
>
>Stu
|