Thanks all that emailed me about their tricks for the front sway bar
installation. The general concensus was:
1. Use vice grips
2. Use "Channel-Locks"
3. Use C-clamps
4. Put tape on the grips, locks and or clamps to protect the paint.
5. Get the car up off the ground with the tires on blocks or some kind of
support so the suspension is level (as it would be if the tires were on the
ground).
6. Get the forward bolts started first but wait until all the bolts are in
before tightening them up.
7. Prepare to cuss alot----If you are installing anything bigger then the
stock sway bar---prepare to cuss more and louder.
John
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.392 / Virus Database: 268.5.5/335 - Release Date: 5/9/2006
|