Mooney,
Thanks, I already referenced the pages. The ONLY reason a "600" base
would work (and that is what I used) is because it is a later version
with the PCV port built in. It is an expensive solution, unless you
have a used good one.
I already discussed the "Boss", adapter ($50) and it does not work on a
hi-rise and a stock air cleaner. (Want to buy a new one?). Won't fit
under my original hood, or my LAT hood.
The "original" Edelbrock LAT solution was to tap the left front runner
unused boss for a hose adapter. This is still a good, if non neat, method.
___
Steve Laifman
Editor - TigersUnited.com
Drmoonstone@aol.com wrote:
>Laifman can tell you all that is needed and it can be found on T.U. site. Try
>the 600 base on your 465 and you won't have height problems. There is also a
>1/4 inch boss 302 carb base that has a vacuum port. It will fit under my hood,
>don't know about yours. Some welding and re-tap is also advised.
>
>Moonstone
|