Re: Dipstick question

["Bob Dixon" <bobdixon@frii.com>]

Just an update.  I ran the engine to get oil in the filter, oil cooler and
oil lines.  Then I let it sit for a couple of days to make sure the block
was empty of oil.  Next, I drained the oil out of the oil pan, and then
put in the 8 quarts to fill the pan.  After it sat for an hour or so I
pulled the dipstick and lo and behold, it showed correct.  No need to
remark the stick.

I guess I was concerned over a non-issue.

Thanks for the suggestions.
-Bob
B9471388