Rear hub/axle removal

["Doug & Rett Leithauser" <dleit@worldnet.att.net>]

I have managed to replace one of my rear wheel studs on the car.
I used a slightly shorter stud, picked out at a local auto parts store, but
I believe it to be the same as the 68 Chevelle that I had at the time.
I have LAT 70 wheels, and I still get plenty of thread engagement, but the
end of the stud is about even with the surface of the wheel, and it is
difficult to get the lug nut started.
I have used this for many years now with no problems.

Happy Motoring
Doug Leithauser