Well,
I finally determined that the stock replacement fuel pump is a little
inadequate for the new power plant. I was just being lazy but now I want to
upgrade the fuel line to 3 eights from the tank forward. I noticed a fitting
that seems to be on the center tank tube that runs along the rear of the
car. Has anyone enlarged this easily or do I need to remove the piece and
have a larger fitting Tig welded on. If that is the only option I will
probably go with an AN type connection and aluminum tubing to the pump. I
have decided on an Aeromotive Street rod pump that delivers 140 gallons per
hour and will maintain 7 PSI with a capability of 14 PSI for Nitrous later.
Has anyone got a better alternative? I would like a pump that can lay flat
and I do not want to run a return line to the Fuel tank. So far Aeromotive
seems the best choice.
Best Regards,
Tim Ronak
Business Development Manager
Akzo Nobel Coatings
Off: (949) 305-5393
Fx: (425) 955-6268
Cell: (949) 289-3357
email: timothy.ronak@akzonobel.com
VM: (800) 234-6747 ext. 2257#
This message, including attachments, is confidential and may be privileged.
If you are not an intended recipient, please notify the sender then delete
and destroy the original message and all copies. You should not copy,
forward and/or disclose this message, in whole or in part, without
permission of the sender.
|